搜索





Products Center

Reudcer (con. /ecc.)

Technical Drawings

Standard drawing of Reducer.

The reducers are often used when the piping designers want to reduce the diameter of a straight run of pipe. There are two styles of standard reducers available in: Concentric – having a common centerline; Eccentric reducer – having offset centerlines.

Dimensions

NPS	O.D L mm inch	O.D S mm inch	H mm inch
3/4 x 1/2	26.7 1.05	21.3 0.84	38 1.50
3/4 x 3/8	26.7 1.05	17.3 0.68	38 1.50
1 x 3/4	33.4 1.32	26.7 1.05	51 2.00
1 x 1/2	33.4 1.32	21.3 0.84	51 2.00
1-1/4 x 1	42.2 1.66	33.4 1.32	51 2.00
1-1/4 x 3/4	42.2 1.66	26.7 1.05	51 2.00
1-1/4 x 1/2	42.2 1.66	21.3 0.84	51 2.00
1-1/2 x 1-1/4	48.3 1.90	42.2 1.66	64 2.50
1-1/2 x 1	48.3 1.90	33.4 1.32	64 2.50
1-1/2 x 3/4	48.3 1.90	26.7 1.05	64 2.50
1-1/2 x 1/2	48.3 1.90	21.3 0.84	64 2.50
2 x 1-1/2	60.3 2.38	48.3 1.90	76 3.00
2 x 1-1/4	60.3 2.38	42.2 1.66	76 3.00
2 x 1	60.3 2.38	33.4 1.32	76 3.00
2 x 3/4	60.3 2.38	26.7 1.05	76 3.00
2-1/2 x 2	73.0 2.88	60.3 2.38	89 3.50
2-1/2 x 1-1/2	73.0 2.88	48.3 1.90	89 3.50
2-1/2 x 1-1/4	73.0 2.88	42.2 1.66	89 3.50
2-1/2 x 1	73.0 2.88	33.4 1.32	89 3.50
3 x 2-1/2	88.9 3.50	73.0 2.88	89 3.50
3 x 2	88.9 3.50	60.3 2.38	89 3.50
3 x 1-1/2	88.9 3.50	48.3 1.90	89 3.50
3 x 1-1/4	88.9 3.50	42.2 1.66	89 3.50
3-1/2 x 3	101.6 4.00	88.9 3.50	102 4.00
3-1/2 x 2-1/2	101.6 4.00	73.0 2.88	102 4.00
3-1/2 x 2	101.6 4.00	60.3 2.38	102 4.00
3-1/2 x 1-1/2	101.6 4.00	48.3 1.90	102 4.00
3-1/2 x 1-1/4	101.6 4.00	42.2 1.66	102 4.00
4 x 3-1/2	114.3 4.50	101.6 4.00	102 4.00
4 x 3	114.3 4.50	88.9 3.50	102 4.00
4 x 2-1/2	114.3 4.50	73.0 2.88	102 4.00
4 x 2	114.3 4.50	60.3 2.38	102 4.00
4 x 1-1/2	114.3 4.50	48.3 1.90	102 4.00
5 x 4	141.3 5.56	114.3 4.50	127 5.00
5 x 3-1/2	141.3 5.56	101.6 4.00	127 5.00
5 x 3	141.3 5.56	88.9 3.50	127 5.00
5 x 2-1/2	141.3 5.56	73.0 2.88	127 5.00
5 x 2	141.3 5.56	60.3 2.38	127 5.00
6 x 5	168.3 6.62	141.3 5.56	140 5.50
6 x 4	168.3 6.62	114.3 4.50	140 5.50

*NPS: Nominal Pipe Size; O.D L: Outside Diameter at Bevel, large end; O.D S: Outside Diameter at Bevel, small end; H: Center-to-End.

Package

Keyword:

Reudcer (con. /ecc.)

Cap

Tee & Cross (equal / reducing)

There is currently no content to display

Product Inruiry
Our staff will contact you within 24 hours (working days). If you need other services, please call the service hotline:+86-317-6725755