搜索
Products Center

ANSI B16.5 Slip-on Flanges

Slip-on flanges has a low hub because the pipe slips into the flange prior to welding. It is welded both inside and out to provide sufficient strength and prevent leakage. Slip-on flanges are all bored slightly larger than the O.D. of the matching pipe They are preferred over welding neck flanges by many users due to their lower inital cost, but final installation cost is probably not much less than that of the welding neck flange because of the additional welding involved.
Category
ANSI Flange
Product Details:
Place of Origin:
CHINA
Brand Name:
XINFENG
Certification:
ISO, CE
Model Number:
ANSI B16.5 CLASS 150LBS-2500LBS
Pressure:
CLASS 600LBS FLANGE
Material:
Carbon steel ASTM A105/A105N; A694 F42-F70; A-350 LF1/LF2; Stainless steel ASTM A182 F304/304L; F316/316L; F321; F51; Alloy steel ASTM A182 F11/F12/F22
Payment & Shipping Terms:
Minimum Order Quantity:
2TONS
Packaging Details:
PLYWOOD CASES AND PALLETS
Payment Terms:
L/C, D/P, T/T
Delivery Time:
10-45DAYS
Supply Ability:
5000TONS/MONTH
E-mail: info@hbxfgj.com
ANSI B16.5 Slip-on Flanges
Introduce

Product Description

Slip-on flanges has a low hub because the pipe slips into the flange prior to welding. It is welded both inside and out to provide sufficient strength and prevent leakage. Slip-on flanges are all bored slightly larger than the O.D. of the matching pipe They are preferred over welding neck flanges by many users due to their lower inital cost, but final installation cost is probably not much less than that of the welding neck flange because of the additional welding involved.

CLASS 150LBS FLANGE

Notes

(1) For the 'Bore'(B1) other than Standard Wall Thickness, Refer this

(2) Class 150 flanges except Lap Joint will be furnished with 0.06" (1.6mm) raised face, which is included in 'Thickness' (t) and 'Length through Hub' (T1), (T2).

(3) For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.

(4) Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.

(5) The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness(t).

(6) Depth of Socket (Y) is covered by ANSI B16.5 only in sizes through 3 inch, over 3 inch is at the manufacture's option.

CLASS 300LBS FLANGE

Notes

(1) For the 'Bore'(B1) other than Standard Wall Thickness, Refer this

(2) Class 300 flanges except Lap Joint will be furnished with 0.06" (1.6mm) raised face, which is included in 'Thickness' (t) and 'Length through Hub' (T1), (T2).

(3) For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to to or tapered within the limits of 7 degrees.

(4) Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.

(5) The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness(t).

(6) Depth of Socket (Y) is covered by ANSI B16.5 only in sizes through 3 inch, over 3 inch is at the manufacture's option.

CLASS 600LBS FLANGE

Notes

(1) For the inside diameter of pipes (corresponding to‘Bore’(B1) of Welding Neck Flanges), Refer this

(2) Class 600 flanges except Lap Joint will be furnished with 0.25" (6.35mm) raised face, which is included in 'Thickness' (t) and 'Length through Hub' (T1), (T2).

(3) For Slip-on, Threaded and Lap joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.

(4) Blind Flanges may with the same hub as that used for Slip-on Flanges or without hub.

(5) The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (t).

(6) Dimensions of sizes 1/2" through 31/2" are the same as for Class 400 Flanges.

(7) Depth of Socket (Y) is covered by ANSI B16.5 only in sizes through 3 inch, over 3 inch is at the manufacture's option.

CLASS 900LBS FLANGE

Notes

(1) For the inside diameter of pipes (corresponding to‘Bore’(B1) of Welding Neck Flanges), Refer this

(2) Class 900 flanges except Lap Joint will be furnished with 0.25" (6.35mm) raised face, which is included in 'Thickness' (t) and 'Length through Hub' (T1), (T2).

(3) For Slip-on, Threaded, and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.

(4) Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.

(5) The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (t).

(6) Dimensions of sizes 1/2" through 21/2" are the same as for Class 1500 Flanges.

CLASS 1500LBS FLANGE

Notes

(1) For the inside diameter of pipes (corresponding to ‘Bore’(B1) of Welding Neck Flanges), Refer this

(2) Class 1500 flanges except Lap Joint will be furnished with 0.25" (6.35mm) raised face, which is not included in 'Thickness' (t) and 'Length through Hub' (T1), (T2).

(3) For Slip-on, Threaded Lap Joint and Socket Welding Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits 7 degrees.

(4) Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.

(5) The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, and facing is carried out according to MSS SP-9, without reducing thickness (t).

(6) Dimensions of sizes 1/2" through 21/2" are the same as for Class 900 Flanges.

(7) Depth of Socket (Y) is covered by ANSI B16.5 only in sizes through 21/2 inch, over 21/2 inch is at the manufacturer's option.

CLASS 2500LBS FLANGE

Notes

(1) For the inside diameter of pipes (corresponding to ‘Bore’(B1) of Welding Neck Flanges.), Refer this

(2) Class 2500 flanges except Lap Joint will be furnished with 0.25" (6.35mm) raised face, which is included in Thickness (t) and 'Length through Hub' (T1), (T2).

(3) For Slip-on, Threaded and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.

(4) Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.

(5) The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (t).

(6) Class 2500 Slip-on Flanges are not covered by ANSI B16.5, slip-on flanges are at the manufacturer's option.

Package

 

Keyword:
Slip-on Flanges
There is currently no content to display
Please add data record on website background.
Product Inruiry
Our staff will contact you within 24 hours (working days). If you need other services, please call the service hotline:+86-317-6725755
全部评论
已有0条评论
There is currently no content to display
Please add data record on website background.

Questions? Contact Us

Username used for comment:
Leave Messages
Description:

Quick Link

Contact Info

ADDRESS: EAST WEISAN ROAD, XIWANG NEW DISTRICT, MENGCUN COUNTY, CANGZHOU CITY, HEBEI PROVINCE, CHINA

OLD ADDRESS:BEIHUAN DEVELOPMENT ZONE MENGCUN COUNTY HEBEI PROVINCE CHINA

E-MAIL: info@hbxfgj.com

Copyright © 2022 Hebei Xinfeng High Pressure Flange And Pipe Fitting Co., Ltd      冀ICP备2021026983号-1       Power by 300.cn   |   SEO TAG

HEBEI XINFENG
Leave Messages